SN65HVD230DR

SN65HVD230DR.pdf

Characteristics of SN65HVD230

It is powered by a single 3.3 V power supply.

Comply with ISO 11898-2 standard.

Low power substitute for PCA82C250 package

The ESD protection of bus pin exceeds ±16 kV HBM.

High input impedance allows up to 120 nodes on the bus.

Adjustable driver switching time to improve emission performance

SN65HVD230 and SN65HVD231

SN65HVD230: low current standby mode

370µA (typical)

SN65HVD231: ultra-low current sleep mode

Typical value is 40nA.

Designed for data rates up to 1 Mbps (1)

Thermal shutdown protection

Open circuit fault safety design

Interference-free power-on and power-off protection for hot-plug applications (1)

(1) The signal rate of the line is the number of voltage conversions per second, and the unit is bps (bits per second).

Description of SN65HVD230

SN65HVD230, SN65HVD231 and SN65HVD232 Controller Area Network (CAN) transceivers meet the specifications of ISO 11898-2 high-speed CAN physical layer standard (transceiver). These devices are specially designed for data rates as high as 1 megabit per second (Mbps) and contain many protection functions, which CAN provide the robustness of devices and CAN networks. SN65HVD23x transceiver is designed for use with Texas Instruments 3.3 V µP, MCU and DSP, and CAN controller or equivalent protocol controller devices. These devices are designed for applications that adopt the physical layer of CAN serial communication conforming to ISO 11898 standard.

These devices are specially designed to operate in particularly harsh environments, with cross-line protection, ground loss and overvoltage protection, over-temperature protection and wide common-mode working range.