MC10XS3412CHFKR2

The 10XS3412 is part of a range of devices designed for low-voltage vehicles

Lighting applications. It has four low RDS (on) MOSFET (dual 10mohm/dual12mohm) can control four separate 55/28W bulbs and/or xenon modules,and/or LED.

Programming, controlling, and diagnosing using 16-bit SPI

Interface. Its output has an optional conversion rate to enhance electromagnetism

Compatibility (EMC) behavior. In addition, each output has its own parallel input

Or SPI control for pulse width modulation (PWM) control. 10XS3412 allowed

The user programs the level and duration of the fault current trip through SPI

Acceptable lamp flow. The device has a fail-safe mode to provide functionality

Output when MCU is damaged.

Features

• four protected 10 m ω and 12 m ω high side switches (at 25 ° C) 

• Operating Voltage Range 6.0-20v, dormancy current & LT; 5.0 ΜA,extension mode from 4.0 to 28V

•8.0 MHz 16-bit 3.3 V and 5.0 V SPI controls and Chrysanthemum status reports Chain ability

The PWM module uses an external clock or a calibrated internal oscillatorProgrammable output delay management

• Smart Flow Off, serious short circuit, overheating

Timed automatic retry protection, and MCU fail-safe modeDamage

• Output OFF or ON open-circuit load detection conforms to the bulb or LED andBattery detection short circuit

Analog current feedback with optional ratio and board temperature

Feedback